Angle Stop / Bracket; Measuring Lengths; Single Measurement; Single Measurement With Self-Timer - KALEAS LDM 500-60 Operating Instruction

Angle stop / bracket

The Distance Meter measures from the angle stop [G] (outside
edge) that is flipped open 180º, such as from a corner or a recess in
which another reference surface cannot be placed.
Flip the angle stop open for use until it engages in the 90º or 180º
position. If the angle stop is not used, fold it back in. It is secured
recessed on the housing and protected against damage.

Measuring lengths

Single measurement

1x
short
1x
short

Single measurement with self-timer

To avoid vibrations and obtain the most precise measurement result
possible, measurement can be carried out with a 5-second delay.
Any measured value – including measured value functions – can be
recorded with time delay on this way.
>1 s Laser [B] is activated, meter is ready for measuring.
28
Laser [B] is activated, meter is ready for measuring.
Display [8]
Hold the reference surface of the Distance Meter at
or against the desired base surface
and direct the laser [B] at the target point.
The single measurement is carried out.
Display [4]
Display [2] [3]
Display [8]
Display [3] [4]
LDM 500-60 ENGLISH
Measured value
Previous measured values
Time remaining until measurement
© KALEAS GmbH & Co. KG