INTRODUCTION Thank you for purchasing this CLARKE Ventilator which is designed for indoor use in an industrial environment. Read this manual carefully, in doing so you guarantee the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
Check that the ventilator is in good working order. Take immediate action to have it repaired or any damaged parts replaced. DO NOT attempt to repair the ventilator yourself. Always contact the CLARKE service department who will use recommended parts only. Unapproved parts may be dangerous and will invalidate your warranty.
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY. This product can be connected to one of the following power supplies: • 110V generator • 110V isolating transformer • 110V site supply •...
BEFORE USE Before commencing assembly, check for damage and or shortages etc, any damage or shortage should be reported to your CLARKE dealer where the ventilator was purchased. This ventilator can be used with CLARKE 12” diameter retractable ducting sold separately in 5 metre...
SPECIFICATIONS Model CON305 (110v) Product dimensions complete (L x W x H) 375 x 386 x 430 mm Drum diameter 380 mm Fan diameter 300 mm Product weight 15.35kg Power supply 110V/50Hz Electrical Insulation class Ingress protection rating IP54 Operating temperature range -20 to 50 Sound power level 69 dB...
Need help?
Do you have a question about the Contractor CON305 and is the answer not in the manual?
Questions and answers