Subscribe to Our Youtube Channel
Related Manuals for Clarke CONTRACTOR CON400
Summary of Contents for Clarke CONTRACTOR CON400
- Page 1 16” VENTILATION FAN MODEL NO: CON400 (110V) PART NO: 3230483 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0520 - iss 3...
-
Page 2: Safety Warnings
INTRODUCTION Thank you for purchasing this CLARKE Ventilator which is designed for indoor use in an industrial environment. Read this manual carefully, in doing so you guarantee the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Electrical Safety
Check that the fan is in good working order. Take immediate action to have it repaired or any damaged parts replaced. DO NOT attempt to repair the ventilator yourself. Always contact the CLARKE service department who will use recommended parts only. Unapproved parts may be dangerous and will invalidate your warranty. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY. This product can be connected to one of the following power supplies: • 110V Generator • 110V Isolating Transformer • 110V Site supply •... -
Page 5: Before Use
BEFORE USE Before commencing assembly, check for damage and or shortages etc, any damage or shortage should be reported to your CLARKE dealer where the fan was purchased. Your ventilation fan should be supplied with the following parts: • 4 x castor (2 with brakes) •... -
Page 6: Specifications
REPLACE GUARD BEFORE RE-CONNECTING TO POWER SUPPLY. No other maintenance is required, should you discover any problem with the ventilator return it to the CLARKE service department for repair. Should the fan fail to operate, check the power supply and that the circuit breaker has no tripped. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CONTRACTOR CON400 and is the answer not in the manual?
Questions and answers