Technical data and dimensions
15.1
Technical data
Note for approved transmitters
Device specifications:
Siemens makes every effort to ensure the accuracy of these specifications, but
reserves the right to change them at any time.
Device-specific approvals:
The device-specific approvals are always to be found on the type plates on the
device.
Materials and weights
Materials, wetted parts
Antenna, process fitting
Process seal
Materials, non-wetted parts
Housing
Housing seals
Cable gland
Sealing, cable gland
Blind plug, cable gland
Inspection window for the
indication
Weight
Torques
Max. torque mounting boss
Max. torque for NPT cable
glands and Conduit tubes
Input variable
Measured variable
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155
PVDF
FKM G type threaded connections only
Plastic PBT (Polyester)
Silicone SI 850 R
PA
NBR, EPDM
PA
Polycarbonate
0.7 kg (1.543 lbs)
7 Nm (5.163 lbf ft)
10 Nm (7.376 lbf ft)
The measured variable is the distance between the antenna edge of
the transmitter and the medium surface. The antenna edge is also
the reference point for the measurement.
15
91