Checking The Engine-Oil Level; Adjusting The Handle Height - Toro Recycler Operator's Manual

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Important:
If the oil level in the crankcase is too low or too high and you run the engine, you may
damage the engine.

Adjusting the Handle Height

You may raise or lower the handle to a position comfortable for you.
1. Remove the handle knobs and corresponding bolts from the lower handles (A of
2. Move the handle to 1 of 2 positions (A of
3. Ensure that the cables are routed to the outside of the handle (B of
4. Install the handle knobs with the corresponding bolts and tighten them firmly by hand (C of
Figure 9
Figure 10).
Figure 10
10
Figure 10).
Figure 10).
g235721
Figure 10).
g311491