Selecting A Book - Franklin SCD-787 User Manual

Once a book card is installed in the unit, you can
select the book you want to use.
1. Turn your unit on.
2. Press CARD.
Icons appear for each available book.
built-in book is highlighted.
3. Press
4. Press ENTER to select it.
5. Press CARD to return to the Card menu.
BOOKMAN Card Troubleshooting
Make sure your book card is installed correctly. If
your card is performing erratically, follow the reset
instructions in "Resetting Your Unit" on page 71. If
this does not fix the problem, remove the card and
then remove the white rubber strip located between
the two metal pins. Clean the rubber strip with your
fingers and then replace it making sure it is
completely in its notch.

Selecting a Book

or to highlight your selection.
The
15