Table of Contents
Advertisement
Your unit is powered by two C batteries. Follow
these instructions to install or replace them.
1. Turn your unit off and turn it over.
2. Lift the battery cover on the back of your
unit by pushing up on the catches.
3. Remove the old batteries, if necessary.
4. Install the batteries following the +/-
markings in the battery compartment.
5. Replace the battery cover.
Warning: If the batteries wear-out completely, or
if you take more than a few seconds while
changing the batteries, any information that was
entered in the built-in book or book card may be
erased. You should always keep written copies
of your important information.
12
Installing Batteries
+
C
_
+
C
_
Advertisement
Table of Contents
