Yamaha RIVAGE PM5 Owner's Manual page 17

F
Channel Strip section (Bay L, Bay C, Bay R)
1
2
3
5
1 [ENCODER ASSIGN] key
Displays a screen that enables you to switch between
the Screen Encoder function and the Channel
Encoder function. You can use only the Channel
Encoder function for channel strips A and B.
2 [HOME] key
Recalls a group of settings for the bay. Press and hold
down this key to store the following settings:
3 PIN indicator
Lights up when the Pinning function for the
[TOUCH AND TURN] knob is turned on.
(This feature will be supported by a future update.)
4 [TOUCH AND TURN] knob
Controls the parameter of the knob you selected by
touching the touch screen.
5 [SHIFT] key
Combine with another key to perform a certain
4
function.
The following table shows an example of using the
[SHIFT] key combined with another key. For more
information, please refer to the RIVAGE PM series
6 Operation Manual.
6 [SENDS ON FADER] key
Turns SENDS ON FADER mode on and off. While
SENDS ON FADER mode is enabled, the input faders
will control the send levels of the corresponding
buses.
• Layers and current screen data
• Selected channel/parameters on screen
Procedure Function
Press and hold down the Temporary link.
[SHIFT] key and press Controlling the parameter of
multiple [SEL] keys. multiple channels
simultaneously.
CS-R5 Owner's Manual 17