Table of Contents
Advertisement
Quick Links
Detergent and fabric softener
Detergent type
Your washer requires low sudsing detergent to prevent oversudsing problems. Low sudsing detergent comes in
powder, liquid or pod form and is labelled 'Front Loading', 'Low Suds', 'High Efficiency' or 'HE'.
Using top loading detergent in your front loader washer may lead to excessive suds formation, which will lengthen
the cycle time as the machine waits for the suds to dissolve.
Where do I put my detergent?
WH8560F, WH8060F, WH8560P, WH8060P and WH7560P models only
Liquid detergent
Is added to the main wash compartment on the left side of the dispenser drawer marked with a
(A). As the machine fills, water is flushed into this compartment and is mixed with the detergent, the detergent
solution is then delivered into the drum. There may be a small volume of water left in the liquid detergent
dispenser at the end of the cycle. This is normal.
Powdered detergent
If you wish to use powdered detergent, the liquid detergent compartment MUST be removed from the dispenser
drawer. To do this firmly grasp and twist the left hand side of the internal compartment and pull upwards (B). To
replace the liquid detergent compartment slide it back into the drawer marked
(C). Press down in the middle until it clicks (D).
https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_...
Updated: Thu, 09 Jul 2020 06:56:54 GMT
Powered by
1
Advertisement
Table of Contents
Related Manuals for Fisher & Paykel WH7560J3
Summary of Contents for Fisher & Paykel WH7560J3
- Page 1 To do this firmly grasp and twist the left hand side of the internal compartment and pull upwards (B). To replace the liquid detergent compartment slide it back into the drawer marked (C). Press down in the middle until it clicks (D). https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_… Updated: Thu, 09 Jul 2020 06:56:54 GMT Powered by...
- Page 2 Is added to the main wash detergent compartment on the left side of the dispensing drawer marked with a 2. As the machine fills, water is flushed through this compartment to deliver a detergent solution into the drum. Detergent in the detergent compartment marked 2 https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_… Updated: Thu, 09 Jul 2020 06:56:54 GMT Powered by...
- Page 3 1. When you select ‘Pre Wash’, the pre wash compartment is flushed at the start of the cycle. For more information refer to ‘Wash cycle options’. Detergent in the pre wash compartment ‘Pre Wash’ marked Detergent in the pre wash compartment option marked 1 https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_… Updated: Thu, 09 Jul 2020 06:56:54 GMT Powered by...
- Page 4 If you wish to use fabric softener we recommend to: 1. Use it sparingly. Measure it carefully and do not use more than 25ml (1/2 cap), some thicker varieties may need diluting. 2. Clean your dispenser regularly. https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_… Updated: Thu, 09 Jul 2020 06:56:54 GMT Powered by...
- Page 5 If you wash a particularly dirty load, we recommend putting the washer through a ‘Rinse’ cycle once the cycle has finished and the load has been removed, to clean out any remnants from that cycle. https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/QuickSmart/WH7560J3/User_Guide_WH7560J3/09_Detergent_… Updated: Thu, 09 Jul 2020 06:56:54 GMT...
Need help?
Do you have a question about the WH7560J3 and is the answer not in the manual?
Questions and answers
put on 30 minute cycle and it took about 1 hour 30 minutes to complete
The Fisher & Paykel WH7560J3 may take longer than expected to complete a cycle, such as 1 hour and 30 minutes for a 30-minute cycle, if there is waxy build-up (scrud) from detergent and fabric softener. This build-up can affect washer performance. Also, using too much or the wrong type of detergent can cause over-foaming, which may extend cycle times. Running a rinse or drum clean cycle may help resolve this.
This answer is automatically generated