Forward-Facing Installation; Lap-Shoulder Belt Installation (Preferred Method) - Britax ADVOCATE User Manual

Britax Child Safety, Inc.

Forward-Facing Installation

Lap-Shoulder Belt Installation (Preferred Method)

1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place upright forward-
facing on the vehicle seat.
Ensure that the base of
the child seat is flat on the
vehicle seat and no more
than 3 in. (7.6 cm) of the
base hangs over the edge
of the vehicle seat (see
page 26).
3. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
4. Slide both the lap and
shoulder parts of the
vehicle belt into the
forward-facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
NOTE: It is not necessary
to lock the lap-shoulder
when installing with
CLICKTIGHT.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
14
3"
3a
3b
6b
6a