Britax ADVOCATE User Manual page 37

ADVOCATE/BOULEVARD CLICKTIGHT User Guide
d. Pull the end of the
belly pad and buckle
retainer out of the
buckle slot in the
cover to remove.
– Turn the buckle
retainer sideways
and slide the buckle
out of the belly pad
(see page 37).
e. Remove seat cover.
5. Detach the hook and loop
fasteners on the head
restraint from around the
harness.
6. Remove the head
restraint.
a. Raise the harness to
the highest position.
b. Detach the elastic
straps from the rear
of the head restraint.
7. Ensure the CLICKTIGHT
is open and remove the
lower shell cover.
a. Detach elastic loops
at front of shell.
b. Lift up from the front
to remove the lower
shell cover.
c. Pull cover up at
sides and around
rear-facing belt
paths.
8. Lower the harness, reach
around the head restraint,
and pull the upper shell
cover towards you to
remove.
4d
6b
7a
7b
35