Table of Contents
Advertisement
Steps
With the positive-side facing up, insert the coin-cell battery into the battery holder on the system board and gently press the battery until
it snaps into place.
Next steps
1. Install the
system-board
2. Install the
back cover
3. Install the
cable cover
(optional).
4. Install the stand.
5. Follow the procedure in
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
5. Remove the
system-board
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
shield.
After working inside your
computer.
Before working inside your
(optional).
shield.
computer.
Removing and installing components
39
Advertisement
Table of Contents
