Steps
1. Align and place the power-button board in the slot on the middle frame.
2. Replace the screw (M3x5) to secure the power-button board to the middle frame.
3. Route the power-button board cable through the display-assembly base.
4. Connect the power-button board cable to the connector on the system board and close the latch to secure the cable.
Next steps
1. Install the speakers.
2. Install the
rear-I/O
bracket.
3. Install the
bottom
cover.
4. Install the
system-board
5. Install the
back cover
6. Install the
cable cover
(optional).
7. Install the stand.
8. Follow the procedure in
Microphones
Removing the microphones
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
5. Remove the
system-board
6. Remove the
bottom
cover.
7. Remove the
rear-I/O
bracket.
8. Remove the
speaker
72
Removing and installing components
shield.
After working inside your
computer.
Before working inside your
(optional).
shield.
computer.