Table of Contents
Advertisement
About this task
The following image indicates the location of the microphones and provides a visual representation of the removal procedure.
Steps
1. Disconnect the microphone cable from the system board, and unroute it from the routing guides on the display-assembly base.
2. Remove the two screws (M2x2.5) that secure the microphone module (2) to the middle frame.
3. Lift the microphone module (2) off the slots on the middle frame.
Installing the microphones
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the microphones and provides a visual representation of the installation procedure.
Removing and installing components
73
Advertisement
Table of Contents
