Table of Contents
Advertisement
LC modules
English
goes on for a short time at irregular intervals. By the end of the program
the lights in the bedroom (output 5) and in the bathroom go on for some
time, the bulbs connected to outputs 2 and 3 switch off.
Program 2: In the entrance-hall (output 1) the light goes on for a short
time at irregular intervals. The offices (or the flats in a multiple family
dwelling) are connected to the outputs 2 to 5. The lights in the offices
go on one after the other, but only after the light in the entrance hall
has previously been switched on. By the end of the program the lights
in the offices switch off one after the other and each time the light in
the entrance hall goes on for a short time.
LC-12 "Fairground attraction illumination": Each of the 5 outputs
can control several connected light bulbs, which form different patterns:
they flash in changing sequences, form running lights, flicker irregularly
etc. The input JP2 has no function in this version.
LC-13 "Candlelight simulator": After switching on the module the
"candles" start to flicker - just like the real thing. At irregular intervals
they brigthen and dim. The input JP2 has no function in this version.
LC-14 "Signal tower box light": The 5 outputs switch at random the
connected bulbs or LEDs. These light for a while and simulate the
activities in a signal tower box. If the input JP2 is switched to earth, the
light sequence is interrupted. If the input remains open, the program
repeats continuously.
LC-15 "Emergency vehicle light": The bulbs / LEDs connected to
the 5 outputs make 2 short flashes and then go off for a short time.
The breaks between the double flashes are of varing duration for the
five outputs. This way the characteristic light pattern for modern
emergency vehicles is created. If the input JP2 is switched to earth, the
light sequence is interrupted. If the input remains open, the program
repeats continuously.
Page 13
Advertisement
Table of Contents
