Table of Contents
Advertisement
Your unit uses 1 CR-2016, 3-volt lithium battery.
Important!! Before you follow these steps please
have the new battery at hand. You will also need a
small Phillips screwdriver (one that fits into screws
with an "x" notch).
1. Turn the unit off and turn it over.
2. Use a Phillips screwdriver to remove the screw
on the battery cover and then remove the
cover.
3. Remove the old battery and insert the new one
with the positive (+) side facing up.
4. Replace the battery cover.
Warning! If the battery wears out completely, or if you
take more than a few seconds while changing the
battery, any user-entered information will be erased.
You should always keep written copies of your impor-
tant information.
Follow the Arrows
The flashing arrows on the right of the screen
show which arrow keys you can press to move
around menus or view more text.
Replacing the Battery
Advertisement
Table of Contents
