Your New Oven; Control Panel; Buttons; Knob - Bosch HB 56S 1 Series Instruction Manual

Your new oven

We will now describe your new oven. This chapter explains the
functions of the control panel and its individual elements.
Information is also provided about the oven's accessories and
internal components.

Control panel

Below is a general overview of the control panel. The display
panel cannot show all the symbols at the same time. Elements
may vary according to the model.
Use
1

Buttons

2

Display panel

3

Knob

Buttons
There are sensors under each button. Do not press the surface
too firmly. Only press the relevant symbol.
Symbol Button function
!
Select the type of heating and temperature
`
Select the automatic program
p
Select the clean function. The clean function
cannot be selected until the self-cleaning side
walls have been installed and the clean function
has been activated in the basic settings. See
the Clean function and Basic settings chapters.
X
Move down one line on the display panel
Y
Move up one line on the display panel
f
Short push = select memory
Long push = store in memory
c
Setting the rapid heating function
0
Open and close the time function menu
B
Turning the oven light off and on
°
Short push = check temperature
Long push = open and close the basic settings
menu
D
Activating/deactivating the childproof lock
%
Switching the oven on and off
n
Short push = begin/pause working
Long push = stop working

 
Knob
Using the knob it is possible to change all the recommended
and configured values. The programming zone's square
brackets indicate the value which can be changed.
The control knob is retractable. The control knob is retracted
and returned by pressing the control.
Display panel
The display panel is divided into various zones.
Left zone = Time functions
■
When opening the "time functions" menu the symbols for
Z
these functions are shown here. On the outer left part, an
arrow
Central zone = Programming zone
■
1st line = Cooking method indicator
2nd line = Temperature indicator
3rd line = Time indicator
The navigation buttons
one line to another. Left and right brackets show on which
line you are situated. The value which appears between the
brackets can be changed with the control knob.
Right zone = Indicator
■
Symbols for different functions are shown here, e. g. for the
childproof lock, rapid heating, etc.
'LVSOD\ SDQHO
shows the operation mode selected.
X Y
and are used to change from
5