Advertisement
Quick Links
Advertisement
Related Manuals for Lemco HDMOD 5L
Summary of Contents for Lemco HDMOD 5L
- Page 1 Operation Manual v1.0 HDMOD "Home" modulator 1 x HD (in/out) to DVB-T (COFDM)
- Page 2 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 1. IMPORTANT SAFETY PRECAUTIONS INFORMATION READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE Παρακαλούμε φυλάξτε αυτό το εγχειρίδιο σε ασφαλές μέρος για μελλοντική αναφορά. WARNING The following safety precautions must be observed to prevent fire or electric shock hazard.
- Page 3 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 Fire zx w Never place a candle or another source of fire on the unit as it may fall and start a fire. zx w If the mains cord or the power connector is damaged or destroyed, or if there is a sudden loss of picture during operation, or if you notice a strange smell or there is smoke, immediately switch the unit off, disconnect the mains cord and contact the manufacturer’s technical support department.
- Page 4 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 2. INTRODUCTION Congratulations on purchasing the HDMOD-5L. You now own a high quality, “Home” DVB-T HD modulator with Bluetooth interface. To get the most out of your purchase, please take the time to carefully read through this manual.
- Page 5 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 3.2 - Typical schedule diagrm IR OUT HD IN RF OUT...
- Page 6 HDMOD-5L. Step 2 Download the “Lemco” app from Google play or App Store: This step is not necessary, if you already have installed the app on your phone / tablet. Step 3 The app has the following icon: Upon execution, the app will ask you to turn on Bluetooth.
- Page 7 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.2 - App usage The app will scan for any available devices that are within range (Picture No1). The list shows all detected devices within range, with the device closest to your phone / tablet at the top of the list.
- Page 8 Picture No3 The backup data are stored on Lemco’s servers. You may backup your data several times. Each backup has its own timestamp. When restoring you may select which backup you want to re- store by its timestamp.
-
Page 9: Table Of Contents
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.1 - PIN Before accessing the connected device’s set- tings, you will need to enter a PIN (Picture No4). This PIN is specific to the HDMOD-5L you have connected and is not associated with your phone / tablet. -
Page 10: Zx W Quick Settings (4.4.3)
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.3 - Quick Settings With this feature you are able to setup several HDMOD-5L modulators easily and quickly, one at a time. All you need is to enter the following parameters, for each of your modulators: zx w The output RF channel... -
Page 11: Zx W Custom Profiles (4.4.4)
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.4 - Custom Profiles The app provides the ability to create custom profiles under your custom name (Picture No7, Picture No8). By tapping on the “+” button you are able to save the current configuration in your phone / tablet for future use. -
Page 12: Zx W Device Name (4.4.5)
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.5 – Device name You may assign any name you want on the HDMOD-5L (Picture No9). The names you may have assigned to your devices are shown while scanning. - Page 13 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.7 – Output attenuator In the “Output attenuator” option (Picture No11), you may select the attenuation applied on the output level, between 0dB, -10dB and -20dB. Set to 0dB: Set the output level to 90dBμV Set to -10dB:...
- Page 14 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.9 - Transport Stream You may set manually all the TS (Transport Stream) parameters (Picture No13). Network name: Set the network name Network ID: Set the network ID Original Network ID: Set the original network ID Service name:...
-
Page 15: Zx W Other Settings
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.10 – Other settings / Factory de- faults You may revert the HDMOD-5L to factory de- faults by tapping on the “ Apply factory defaults ” button (Picture No14). Note: All settings of the device will be reset, in- cluding the PIN (4.4.1) and any custom profile (4.4.4) you may have applied. -
Page 16: Update Firmware (4.4.12)
HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.12 – Other settings / Update firmware The app is capable of updating the device’s firmware. The procedure is automatic and if a newer firmware version is available, you only need to tap on the “Update firmware” button for the procedure to start. - Page 17 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 4.4.13 - System Info On this page you may see information details of the connected HDMOD-5L (Picture No19). Picture No19 4.4.14 - Help The last menu entry is the “Help” for the device (Picture No20).
- Page 18 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 5. TECHNICAL SPECIFICATIONS Input Type: 1 x HDMI in & 1 x HDMI out HDMI loop-through: Connector: 1 x HDMI Type A Video coding: MPEG-4 AVC/H.264 Profile: High profile 4.0 Resolution: 1920x1080-30p for HDMI...
- Page 19 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 Programming interface via Bluetooth Requires version 4.0 and above ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan) App information: Android version 5.1 and above iOS version: 11 or above...
- Page 20 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 6. DIMENSIONS 100,03 198,00 169,80 198,00 184,00 7,00 *dimensions in mm...
- Page 21 OPERATION MANUAL v1.0 7. LEMCO LIMITED WARRANTY This Lemco unit is guaranteed against defects in workmanship and materials for a period of five (5) years beginning on the date of purchase of the product. During the applicable warranty period, Lemco will repair or replace at our sole option, without charge, any defective component part of the purchased unit.
- Page 22 | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 8. WARNINGS Content warning This document contains preliminary information about a product of Lemco com- pany. Lemco reserves the right to make any changes or modifications at any time without prior notice.
- Page 23 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 APPENDIX Α DVB-T bitrates (Mbit/s) for 8 MHz bandwidth (non-hierarchical systems) Modulation Coding Rate Guard Interval 1/16 1/32 QPSK 4.976 5.529 5.855 6.032 6.635 7.373 7.806 8.043 7.465 8.294 8.782...
- Page 24 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 DVB-T bitrates (Mbit/s) για 6 MHz bandwidth (non-hierarchical systems) Modulation Coding Rate Guard Interval 1/16 1/32 QPSK 3.732 4.147 4.391 4.524 4.976 5.529 5.855 6.032 5.599 6.221 6.587 6.786 6.221...
- Page 25 HDMOD | 1 x HD (in/out) to DVB-T (COFDM) | OPERATION MANUAL v1.0 9. NOTES...
- Page 26 Contact Information Lemco IKE Latheas 46 - 13678 Tel: +30 210 2811401 Athens - Greece Fax: +30 210 2825755 www.lemco.tv Email: info@lemco.gr...