Eu Declaration Of Incorporation - Aerotech ABL1500-B Hardware Manual

ABL1500-B Hardware Manual

EU Declaration of Incorporation

Manufacturer: Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
herewith declares that the product:
ABL1500-B Stage
is intended to be incorporated into machinery to constitute machinery covered by the Directive
2006/42/EC as amended; and that the following harmonized European standards have been
applied:
EN ISO 12100:2010
EN 60204-1:2010
and further more declares that
it is not allowed to put the equipment into service until the machinery into which it is to be
incorporated or of which it is to be a component has been found and declared to be in con-
formity with the provisions of the Directive 2006/42/EC and with national implementing
legislation, i.e., as a whole, including the equipment referred to in this Declaration.
This is to certify that the aforementioned product is in accordance with the applicable requirements of the fol-
lowing Directive(s):
2011/65/EU
Authorized Representative:
Address:
Name
Position
Location
Date
www.aerotech.com
Safety of machinery - Basic concepts, general principles for
design
Safety of machinery - Electrical equipment of machines - Part
1: General requirements
RoHS 2 Directive
Simon Smith, European Director
Aerotech Ltd
The Old Brick Kiln, Ramsdell, Tadley
Hampshire RG26 5PR
UK
/ Alex Weibel
Engineer Verifying Compliance
Pittsburgh, PA
12/21/2018
Declaration of Conformity
9