Miele SmartLine CS 7612 Operating And Installation Instructions page 70

Installation
Installing the SmartLine appliance
 Stick the supplied sealing strip under
the edge of the SmartLine appliance.
Do not apply the sealing strip under
tension.
 Feed the mains connection cable
down through the worktop cut-out.
 Position the SmartLine appliance in
the worktop cut-out. When doing this,
make sure that the seal of the
appliance sits flush with the worktop
on all sides. This is important to
ensure an effective seal with the
worktop.
 Connect the SmartLine appliance to
the mains electrical supply.
 If required, connect the SmartLine
appliance to the gas supply (see
"Installation – Gas connection").
 Check that the SmartLine appliance
works.
 Seal the gaps between the individual
SmartLine appliances and between
the appliances and the worktop with
a silicone sealant that is heat-
resistant to at least 160 °C.
Unsuitable sealant can damage
natural stone.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Please follow the
manufacturer's instructions.
70