Table of Contents
Related Manuals for Suzohapp Vision Pro 150TFT Series
Summary of Contents for Suzohapp Vision Pro 150TFT Series
- Page 1 27" LCD Monitor Model: 150TFT[X]2705 [X] Manual Version 1.0 / July 2017 Antonie van Leeuwenhoekstraat 9 3261LT Oud-Beijerland The Netherlands Phone : +31(0)186-643333 Fax : +31(0)186-643322 Email : info@suzohapp.nl Web : eu.suzohapp.com...
-
Page 2: Table Of Contents
Index Introduction ............................. 3 Safety ............................... 3 Model descriptions .......................... 3 Monitor connections ........................3 Monitor specifications ........................4 Operation ............................5 OSD MENU ............................6 Mounting instructions ........................8 Accessories ............................9 Page 2 of 9... -
Page 3: Introduction
1. Introduction Congratulations with the purchase of your monitor. This LCD monitor is a color active matrix thin-film- transistor (TFT) liquid crystal (LCD) to provide superior display performance. 2. Safety This monitor is only suitable for use in an indoor environment where it’s not sealed and not subject to dust, dirt and/or condensation (Pollution Degree 2) (IP20). -
Page 4: Monitor Specifications
5. Monitor specifications Panel Manufacturer Part No. M270HVN02.0-7 Absolute Maximum Ratings Item Unit Typical Remarks Rated Ambient Temperature °c Storage Temperature °c Relative Humidity Altitude 2000 Not sealed, not subject to Pollution Degree dust, dirt, condensation Input characteristic Description Signal Unit Typical Remarks... -
Page 5: Operation
6. Operation Color LED: This LED shows the state of the controller. Green is the “normal state”. Red is the “Off mode”. (Can’t find Sync. signals) Amber is the “DPMS mode” (Display Power Management Signaling). PC Settings: The PC needs to be set to an appropriate graphics mode that has the same resolution with the LCD panel to have clear screen image. -
Page 6: Osd Menu
7. OSD MENU The chosen OSD settings will be stored in memory. The OSD menu can be cleared from the screen by pressing the MENU button otherwise it will be automatically cleared after a few seconds of non‐use. OSD Main Menu [PICTURE] [COLOR] [SCREEN]... - Page 7 OSD GUI Control Table MAIN SUB MENU CONTROL MENU Brightness 50(0~100) Contrast 50(0~100) Sharpness 2( 0 ~ 4) H Position 50(0~100) Picture V Position 50(0~100) PC ONLY Clock 50(0~100) Phase 30(0~100) Color Status Management User(User, Warm, Normal, Cool) 50(0~100) Green 50(0~100) Color PC ONLY...
-
Page 8: Mounting Instructions
8. Mounting instructions 75,0 350,0 75,0 632,2 14,0 60,0 140,0 60,0 35,6 292,7 259,9 226,6 75,0 350,0 75,0 12VDC VESA MOUNT - 200 X 100 - M4 (6X) MAX SCREW DEPTH = 22MM OSD BUTTONS 100,0 100,0 Page 8 of 9... -
Page 9: Accessories
9. Accessories Part number Description Power supply input 100/240V output 150-00 12V 5A 22-0012-4 Power cable Euro lead 1.80M 149-0143-1 Displayport Cable 2M m/m 49-0112-11 VGA cable 1.80M 149-0147 USB cable type a-b m/m 1.80M Page 9 of 9...
Need help?
Do you have a question about the Vision Pro 150TFT Series and is the answer not in the manual?
Questions and answers