en Installation instructions
Connect the cable.
8.
Press together the cable duct at the sides and at-
9.
tach.
Fitting the filter cover
WARNING ‒ Risk of injury!
¡ Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
¡ Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.
▶
Open the hinges on the filter cover.
1.
25
20
Mount the filter cover on the designated screws and
2.
push it backwards/forwards depending on the key
hole opening into the narrow section.
Tighten the fastening screws on the hinges.
3.
Check whether the appliance frame is lying flush.
4.
5
Retighten the screws if necessary.
Insert the cable, depending on the appliance model
5.
A or B.
Need help?
Do you have a question about the I95CBS8W0 Series and is the answer not in the manual?
Questions and answers