en Safety Further information and explanations are available online: Table of contents The appliance can only be used safely if it is correctly installed according to the safety in- structions. The installer is responsible for en- INFORMATION FOR USE suring that the appliance works perfectly at its Safety .............. 2 installation location.
Page 3
Safety en WARNING ‒ Risk of poisoning! WARNING ‒ Risk of fire! Risk of poisoning from flue gases being Fatty deposits in the grease filters may catch drawn back in. Room-air-dependent heat-pro- fire. ▶ Never operate the appliance without a ducing appliances (e.g. gas, oil, wood or coal- operated heaters, continuous flow heaters or grease filter.
en Safety Risk of falling when working on the appliance WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Carefully clean the appliance interior. Items placed on the appliance may fall off. ▶ Do not place any objects on the appliance. Changes to the electrical or mechanical as- sembly are dangerous and may lead to mal- ▶...
Preventing material damage en WARNING ‒ Risk of fire! WARNING ‒ Risk of electric shock! Fatty deposits in the grease filters may catch Penetrating moisture may cause an electric fire. shock. ▶ Clean the grease filters regularly. ▶ Do not use wet sponge cloths. WARNING ‒ Risk of injury! Improper repairs are dangerous.
Page 6
en Operating modes The saturation indicator must be adjusted to the selec- ted operating mode and the filters used. → "Setting the saturation indicator", Page 8 4.1 Air extraction mode The air which is drawn in is cleaned by the grease fil- ters and conveyed to the exterior by a pipe system. The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other...
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance F a mi l i a r i s i n g y o u r s e l f wi t h y o u r a ppl i a n c e 5.1 Controls Switch the fan run-on on or off Home Connect Establishing a connection...
Page 8
en Basic operation so oft drücken, bis in der LED-Anzeige die LED 4 7.11 Sensor sensitivity für die Intensivstufe 1 leuchtet. In automatic mode, a sensor in the appliance detects so oft drücken, bis in der LED-Anzeige die LED 5 the intensity of the cooking odours and roasting für die Intensivstufe 2 leuchtet.
Page 9
Home Connect en 7.15 Resetting the saturation indicator Press and hold and for approx. three seconds. a In the LED display, the LED for the setting that is After cleaning the grease filter or after changing the currently selected lights up. odour filter, the saturation indicator can be reset.
en Hob-based hood control ¡ You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. ¡ Installation takes a few minutes. You cannot use your appliance during installation.
Cleaning and servicing en 10.1 Cleaning products Clean as follows, depending on the surface: Clean stainless steel surfaces in the direction of ‒ You can obtain suitable cleaning products from after- the finish using a sponge cloth and hot soapy sales service or the online shop. water.
Page 12
en Cleaning and servicing Press the lock on the filter cover. Observe the information regarding the cleaning agents. → "Cleaning products", Page 11 Soak the grease filter in hot soapy water. Use special grease solvent for stubborn dirt. You can obtain grease solvents from customer service or the online shop.
Troubleshooting en 10.8 Replacing the batteries in the remote Remove the empty batteries. control WARNING ‒ Risk of injury! Children may swallow batteries. ▶ Keep batteries out of the reach of children. ▶ Keep an eye on any children when you are repla- cing batteries. Batteries may explode.
en Disposal Fault Cause and troubleshooting The lighting does not Different causes are possible. work. ▶ Call → "Customer Service", Page 14. ▶ Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only. Remote control not The batteries are flat.
2014/53/EU. A detailed Declaration of Conformity can be found on- A detailed RED Declaration of Conformity can be found line at www.neff-home.com/uk among the additional online at www.neff-home.com among the additional documents on the product page for your appliance.
Page 16
The manufacturer, BSH Hausgeräte GmbH deems that Products) Regulations 2023 can be found online at it has complied with www.neff-home.com/uk/ among the additional docu- ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, ments on the product page for your appliance.
Installation instructions en coming/exhaust air wall box alone is not sufficient to ensure compliance with the limit. ▶ In any case, consult your responsible chim- ney sweep. They are able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you.
Page 18
en Installation instructions clearance, the larger of the two must al- WARNING ‒ Risk of electric shock! ways be provided for. If gas hobs and elec- Sharp-edged components inside the appli- tric hobs are operated together, the largest ance may damage the connecting cable. specified clearance applies.
Page 19
Installation instructions en ¡ When discharging the exhaust air, the official and ¡ Use a short, straight exhaust air pipe with as large a legal regulations, such as the regional building pipe diameter as possible. code., must be observed. ¡ Long, rough exhaust air pipes, many pipe bends or ¡...
Page 20
en Installation instructions Connecting the appliance Tilt the transport lock slightly upwards and carefully pull it upwards and out at an angle. Press together the cable duct at the sides and re- move it. Remove polystyrene residues from the interior of the appliance.
Page 21
Installation instructions en Fitting the filter cover Push the fan box to the side and connect the appli- ance to the power supply. WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Wear protective gloves. Risk of injury when opening and closing the hinges. ▶...
Page 22
en Installation instructions Removing the appliance Check whether the appliance frame is lying flush. WARNING ‒ Risk of injury! The appliance is heavy. ▶ To move the appliance, two people are required. ▶ Use only suitable tools and equipment. Components inside the appliance may have sharp edges.
Page 23
Installation instructions en Push the fan box to the other side and pull out the mains plug. Screw the fan box firmly back in place. Loosen the mounting brackets. Push the removal slide inwards. Slowly take the appliance out of the cutout.
Page 24
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom *9001487515* Register your product online neff -home.com BSH Hausgeräte GmbH 9001487515 Carl-Wery-Straße 34 040304 81739 München, GERMANY...
Need help?
Do you have a question about the I25CBS8W0B and is the answer not in the manual?
Questions and answers