1000Base-Xd Cwdm Sfp Specifications; 1000Base-Zx Ddi Sfp Specifications - Avaya 2330 Installation Manual

1000BASE-XD CWDM SFP specifications

The 1000BASE-XD SFPs provides CWDM gigabit Ethernet connectivity using single mode
fiber. These SFPs support full-duplex operation only. The part numbers of the 40 km models
range from AA1419025-E5 to AA1419032-E5.
Important:
For the 40 km CWDM SFPs, a minimum attenuation of 4 dB must be present between the
transmitter and receiver. To avoid receiver saturation, you must insert a minimum attenuation
of 4 dB when you test the CWDM SFP in loopback mode, or use short runs of fiber with no
intermediate CWDM OADM or CWDM OMUX.
Table 16: 1000BASE-XD CWDM (40 km) SFP specifications
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Operating temperature range
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power

1000BASE-ZX DDI SFP specifications

The following table describes the 1000BASE-ZX DDI SFP. This SFP operates at 1550 nm and
has a reach of up to 70 km. The part number is AA1419052-E6 (internal part number 318251-
B).
Caution:
Risk of equipment damage
Installation — SFPs
Parameter
1000BASE-XD CWDM SFP specifications
Specifications
Duplex LC
SMF, 9 µm
1.0 Gb/s
1.25 Gb/s
0 to 60C
17 dB
– 4.0 to 1.0 dBm
– 21 dBm
– 3.0 dBm
December 2011 41