Parts And Functions; Control Panel - Hitachi DS55MU01 User Manual

2.

Parts and Functions

2.1.

Control Panel

9
1 [ ] button
Use this button to turn the display on or put the
display to standby.
2 [MUTE] button
Switch the audio mute ON/OFF.
3 [INPUT] button
Choose the input source.
4 [ ] button
• Increase the volume
• Enter into submenu while OSD menu is on
5 [ ] button
• Decrease the volume
• Back to previous menu while OSD menu is
on
6 [ ] button
• Move the highlight bar up to adjust the
selected item while OSD menu is on
• Increase the adjustment while adjust value.
7 [ ] button
• Move the highlight bar down to adjust the
selected item while OSD menu is on.
• Decrease the adjustment while adjust value.
MUTE INPUT MENU
1 2 3 4 5 6 7 8
8 [MENU] button
Return to previous menu while OSD menu is
on, or to activate the OSD menu when OSD
menu is off.
9 Remote control sensor and power status
indicator
• Receives command signals from the
remote control.
• Indicates the operating status of the display
without OPS:
• Lights green when the display is turned
on
• Lights red when the display is in standby
mode
• When {SCHEDULE} is enabled, the light
blinks green and red
• If the light blinks red, it indicates that a
failure has been detected
• Lights off when the main power of the
display is turned off
* Using IR sensor cable for better remote
control performance. (Please refer to the
instructions of 3.5)
3
DS55MU01