Control Buttons And Functions; Disassembly Instructions - Hitachi CML171SXW Service Manual

Hide thumbs Also See for CML171SXW:

Table of Contents

Hitachi CML171SXW LCD Monitor Service Manual (v1.1)

3. Control Buttons and Functions

There are four control buttons located at the lower part of the front panel of your display:

ð POWER: Push to turn on or turn off the display. The power indicator (Green) will light

while the display is on.

ð Select: Display the On-Screen Display (OSD) "Main Menu" , selects items for user

adjustment, and execute the function selected.

Note:

Hold down this key for 2 seconds will clear OSD menu.

ð Up( △): Move upward through the choice in the OSD submenu. If an adjustment bar is

displayed, this button increases the setting value.

Note:

This key is also used as 'direct key' to bring-up OSD "Audio Menu".

ð Down( ▽): Move downward through the choice in the OSD submenu. If an adjustment bar

is displayed, this button decreases the setting value.

Note:

This key is also used as 'direct key'. When the OSD "Main Menu" is inactive, press

this key will execute 'Auto Setup' function.

For detailed control functions, please refer to the User's Manual

To disassembly the monitor, follow the steps as below:

1) Face Down the Monitor.

Note:

Face down the monitor on a smooth plane with a soft material on that plane to

protect the panel faceplate.

2) Hinge Cover Removal

As below, remove the screw indicated by "A" from the hinge cover, and then remove the

hinge cover (indicated by "B") for the base.

Table of Contents