2.
Parts and Functions
2.1.
Control Panel
1 [
] button
Use this button to turn the display on or put the
display to standby.
2 [MUTE] button
Switch the audio mute ON/OFF.
3 [INPUT] button
Choose the input source.
4 [
] button
•
Increase the volume
•
Enter into submenu while OSD menu is on
5 [
] button
•
Decrease the volume
•
Back to previous menu while OSD menu is
on
6 [
] button
•
Move the highlight bar up to adjust the
selected item while OSD menu is on
•
Increase the adjustment while adjust value.
7 [
] button
•
Move the highlight bar down to adjust the
selected item while OSD menu is on.
•
Decrease the adjustment while adjust value.
8 [MENU] button
Return to previous menu while OSD menu is
on, or to activate the OSD menu when OSD
menu is off.
9
MUTE INPUT
MENU
1
2
3
4
5
6
7
8
9 Remote control sensor and power status
indicator
•
Receives command signals from the remote
control.
•
Indicates the operating status of the display
without OPS:
•
Lights green when the display is turned
on
•
Lights red when the display is in standby
mode
•
When {SCHEDULE} is enabled, the light
blinks green and red
•
If the light blinks red, it indicates that a
failure has been detected
•
Lights off when the main power of the
display is turned off
* Using IR sensor cable for better remote
control performance. (Please refer to the
instructions of 3.5)
3
DS65MU01