Hitachi DS55MU01 User Manual page 45

DS55MU01
Factory reset
CANCEL
6.2.5. Configuration2 menu
Picture OSD turn off
Screen OSD H position
Audio OSD V position
Configuration 1 Information OSD
Configuration 2 Logo
Advanced option Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
OSD turn off
Set the period of time the OSD (on-screen display)
menu stays on the screen.
The options are: {Off, 5 ~ 120} seconds.
*{Off} does not disappear automatically.
OSD H position
Adjust the horizontal position of the OSD menu.
OSD V position
Adjust the vertical position of the OSD menu.
Information OSD
Set the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will display when input signal is
changed.
The information OSD will remain on the screen with
{Off} selection.
The options are: {1 ~ 60} seconds.
Logo
Choose to enable or disable the picture of Logo
when turn on your display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, both scalar OTS logo and
android animation OTS logo will show.
2. If Log set to OFF, neither scalar OTS logo nor
android animation logo will not show.
3. If Logo set to USER, custom logo option in
android is not set, then there will be no boot
logo when power on.
4. If Logo set to USER, custom logo option in
android is set, there will be only custom logo
Reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action
38
when power up.
* Logo will NOT rotate with rotation setting/
detection.
Monitor ID
Set the ID number for controlling the display via the
RS232C connection. Each display must have a unique
ID number when multiple sets of this display are
connected. Monitor ID number range is between 1 to
255.
The option are: {Monitor group}
Monitor ID
Monitor ID
Monitor group
• {Monitor group}
The options are: {Off} / {1-254}
• {Off} – {Monitor group} are not
supported.
• {1-254} – {Monitor group} are supported.
The default setting is 1.
1 2
5 6
9 10
13 14
Heat status
This function allows you to check the thermal status
at any time.
Monitor information
Shows information about your display, including model
number, serial number, operating hours and software
version.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
HDMI Version
Set the HDMI version to 1.4 or 2.0, this setting is only
valid on HDMI input
Configuration2 reset
Reset all settings in Configuration2 menu to the
factory preset values.
1
1
3 4
7 8
11 12
15 16
DS65MU01
N/A
0
FB01.06