Table of Contents
Advertisement
Chapter 2 Install Your Product
1. Input and Output Connection
Connect signals to processor and processor to the displays.Tighten connector
screws/locks where provided.
ensure all devices are powered off first
2. Connect to Controller
Connect LAN port on the device to the computer which runs XPOSE by CAT5 cable In the
package or Connect USB-B port on the device to USB-A port on the computer by a USB
A-B cable.
3. Connect to Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
The power indicator on front panel lights.
User Manual
FLEX 32
12
Advertisement
Table of Contents
Need help?
Do you have a question about the FLEX 32 and is the answer not in the manual?
Questions and answers