Table of Contents
Advertisement
Select the layer to be adjusted, click the More shortcut "
" in the bottom of
the interface, and enter the interface as follows:
Scale: Set the X, Y, width and height.
Crop: Crop the left, top, width and height.
Display Mode: Select "Live" or "Freeze".
Mirror: Enable or disable the mirror function, default "OFF".
Bypass Mode: Enable or disable the bypass mode. When select "ON", the output
format will be the same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select "Reset", the input property will be recover to factory setting.
Take
The take interface is shown as the figure below:
Set the transition time, and the adjustment range is 0~10S.
Slide the black out switch to enable or disable the black function. Auto take on is the
default state. If select black out and auto take on, the preview image will black or
FLEX 32
User Manual
40
Advertisement
Table of Contents
