Optimizing The Disk - Fostex D-1624 Reference Manual

OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7 8
5.Press and hold down the RECORD button and
press the EXECUTE/YES key.
The recorder starts the backup format operation.
During the format operation, [REMAIN] lights up on the
screen and the recorder indicates the size of the
unformatted area on the disk, which counts down as
the format operation proceeds. Wait until formatting
is complete. When the format operation is complete,
[COMPLETED !] lights up and the disk stops spinning.
If you are using a disk that was formatted with the Multiple Undo function turned on, free disk space becomes
smaller quickly because the disk always keeps the Multiple Undo files. Optimizing such a disk (using the [Disk
Optimize?] menu in Setup mode) will increase free block space.
<Note>
After you record multiple takes, if you optimize the disk (with the Multiple Undo function turned on), you will
be able to undo only the most recent take. Therefore, if you wish to keep some takes, perform the Multiple
Undo function or use the Program duplicate function to restore the take, then optimize the disk. For more
information, see "Multiple Undo Function" on page 64 .
1.While the disk is not being accessed, press the
SETUP key to put the unit into Setup mode.
2.Turn the JOG dial to select the [Disk Optimize?]
menu and press the EXECUTE/YES key.
The recorder displays the following indication and
[SURE ?] flashes.
OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7 8 9
OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7 8 9
3.Press and hold down the RECORD button and
press the EXECUTE/YES key.
The disk optimize function starts. When it is complete,
[COMPLETED!] lights up.
OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7
D824/D1624 Reference Manual (Formatting and Optimizing Disks)
SETUP
FORMAT
44.1kHz
SURE?
9 10 11 12 13 14 15 16

Optimizing the disk

SETUP
44.1kHz
10 11 12 13 14 15 16
SETUP
44.1kHz
SURE ?
10 11 12 13 14 15 16
SETUP
44.1kHz
COMPLETED !
8 9 10 11 12 13 14 15 16
6.Press the EXIT/NO key (or the STOP button) to exit
Setup mode.
Flashing
The recorder displays the time base value of the current
drive that was shown before the unit entered Setup mode.
To eject the disk from the backup drive, press the EJECT
button on the drive.
4.Press the EXIT/NO key (or STOP button) to exit
Setup mode.
Flashing
Flashing
33