Setting The Metronome Function - Fostex D-1624 Reference Manual

D824/D1624 Reference Manual (Changing the Initial Settings <SETUP mode>)
Setting the Metronome function ("Click ?" menu)
"Setting the Metronome function" menu allows you to determine whether or not the recorder outputs a
metronome sound from Real track (D824=track 8, D1624=track 16) during playback or recording.
Turning the Metronome function on enables you to record your performance while playing the instrument
accompanying the metronome sound.
<Notes>
* The metronome sound is output from track 8 in the D824 and from track 16 in the D1624.
* When the metronome function is switched ON, the metronome sound cannot be recorded on the
output track nor can the recorded sound be played back. However, in a D1624 formatted in
96kHz/24bit (track 8), as the metronome sound will be output from track 16, real tracks 1-8 can
all be used for record / playback.

Setting the Metronome function

1.While the recorder is stopped, press the SETUP
key to enter SETUP mode.
2.Turn the JOG dial to select [Click ?] ([?] flashes.),
then press the EXECUTE/YES key.
The current setting ([Off] or [On]) appears on the display.
Pressing the EXECUTE/YES key lights up the flashing [?]
character steadily; the current setting flashes.
The initial setting is [Off] as shown below.
OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7
OL
0
3
6
9
12
18
24
30
42
_
1 2 3 4 5 6 7
• Initial setting:
• Option:
* You can turn the function on and off for each Program individually.
* The settings cannot be saved and loaded as part of the song data.
* The settings are maintained after you turn off the power to the recorder.
SETUP
44.1kHz
8 9 10 11 12 13 14 15 16
SETUP
44.1kHz
8 9 10 11 12 13 14 15 16
Flashing
[Off]
[Off], or [On]
3.Turn the JOG dial to select [On] or [Off].
Selecting [On] will enable the output of the metronome
sound. Selecting [Off] (initial setting) will disable the
metronome output.
4.Press the EXECUTE/YES key.
The display shows the selection (On or Off), then returns
to the indication in step 2.
To cancel the setting operation, or to exit SETUP mode
after storing data, press the STOP button or the EXIT/
NO key. Each time you press one of these keys, the
recorder returns to the previous hierarchy level of the
menu, and finally exits SETUP mode.
107