Summary of Contents for Num'axes Canicom 200 First
Page 1
Polarity « - » Seal of the battery of the battery Red mark: area where the magnet is located to switch On/Off the collar and to code the collar with the remote control Canicom 200 First technical support www.numaxes.com maj 08/2020 - 1/5...
Page 2
− Switch on the collar and remote control. − When pressing the 1, 2, 3, 4 or 5 button, the neon test lamp must light with more or less intensity depending on the stimulation level. Canicom 200 First technical support www.numaxes.com maj 08/2020 - 2/5...
Page 3
Reset: connect the 2 must be emitted indicating the correct installation battery supports of the battery). − Test the product with the neon test lamp (see paragraph “Check product operates correctly”). Canicom 200 First technical support www.numaxes.com maj 08/2020 - 3/5...
Page 4
− Remove the battery from the collar and remote control if you are not using the product for 3 months or more. − Never leave a discharged battery in the collar or remote control. Canicom 200 First technical support www.numaxes.com maj 08/2020 - 4/5...
Page 5
45161 OLIVET CEDEX FRANCE Monday - Friday: 9h-12h / 14h-17h Phone +33 (0)2 38 69 96 27 Fax +33 (0)2 38 63 31 00 You can also contact us at export@numaxes.com Canicom 200 First technical support www.numaxes.com maj 08/2020 - 5/5...
Need help?
Do you have a question about the Canicom 200 First and is the answer not in the manual?
Questions and answers