Specifications - Fostex CR300 Service Manual

CR300

1. SPECIFICATIONS

FUNCTION LIST
Automatic Disk Recognition
Sampling Rate Converter
Synchronous Recording
Auto Stop Delay in Digital Synchro
Copy Bit Setting
Auto Track Increment
Manual Track Increment
REC MUTE
Fade In / Fade Out
PREVIOUS
Erase Mode (CD-RW)
Direct Search
Track Search
Manual Search
One Song / All Song / Program Repeat
Program Playback
Skip Playback
Sampling Monitor
Displayed Time
Laser Hour Meter
Margin Display
Auto Pause
Auto Power Calibration
Remote Controller On / Off
Digital Out On / Off
Balanced Input Sensitivity Switching
DISPLAY
FL Display
LED Display
INPUT/OUTPUT TERMINAL
Audio Input (Input Impedance)
Audio Output (Output Impedance)
6
Automatic conversion (48 kHz, 32 kHz
ON/OFF switchable (44.1 kHz)
Synchronous to one song / all songs / DAT ID
0 sec, 10 sec, off
No restriction / one time only / prohibited
6 levels
Fade time: 6 sec, 9 sec, 12 sec, 18 sec
End section of previous track can be played back while in
REC PAUSE mode
Last Track, All Track, Disc, TOC
Operational through remote controller only
Operational through remote controller only
Elapsed playback time, Remaining playback time,
Total remaining playback time, Total playback time,
Elapsed recording time, Remaining recording time,
Total recording time
+ 4 dBu / -10 dBV
Play, Pause, REC (Rec), RPT-1 (Repeat, 1-Repeat),
AUTO TRACK (Auto Track No.), PGM (Program),
FADER (Fader), SKIP ON (Skip ON/OFF),
32/44/48 (Input sampling frequency),
SYNC (Digital Synchronous Recording),
CD-RW/FINALIZE (Disc Type)
Track number, Level meter, Elapsed playback time,
Remaining playback time, Total remaining playback time,
Total playback time, Elapsed recording time,
Remaining recording time, Total recording time
RCA pin (27 k or more)
Balanced XLR-3 (10 k )
RCA pin (1 k )
Balanced XLR-3 (1 k or less)
44.1 kHz)