Advertisement
Quick Links
ASKOHEAT‐
FO
Installation instructions, operating instruction and
Fi ng instruc ons, user manual and service
Please keep in a safe place
Flange heater Ø 180 mm for industrial and hea ng water
1.0 to 10.0 kW (type A)
AHFOR-BI-A-...
AHFOR-B-A-...
12.0 to 18.0 kW (type E)
AHFOR-BI-E-...
AHFOR-B-E-...
Index
User manual
Fi ng instruc ons
Circuit diagram
Service
Malfunc on
Allgemeine Sicherheitshinweise
General safety information
Do not place the device into opera on un l a er having read the user manual.
These devices may be used by children aged 8 or more and by persons with reduced physical, senso-
ry or mental capacity or those lacking in experience and/or knowledge if they are supervised or if
they have been instructed in safe opera on of the device and understood the resultant dangers.
Children may not play with the device. The device may not be cleaned or serviced by children unless
they are supervised.
I n s t a l l a t i o n , s e t t i n g a n d r e m o v a l m u s t b e
I n s t a l l a t i o n , E i n s t e l l u n g u n d A b b a u m ü s s e n
c a r r i e d o u t o n l y b y q u a l i f i e d e l e c t r i c i a n s .
a u s s c h l i e s s l i c h d u r c h E l e k t r o f a c h k r ä f t e e r f o l g e n .
ASKOHEAT‐
_180_1-18_en
FO
Flange heater Ø 180 mm
MVGASV_160101_en_V3
www.askoma.com
Page 2
Page 3
Page 7
Page 8
Page 8
Page 1
Advertisement
Related Manuals for ASKOMA ASKOHEAT-FO AHFOR-BI-A Series
Summary of Contents for ASKOMA ASKOHEAT-FO AHFOR-BI-A Series
- Page 1 E l e k t r o f a c h k r ä f t e e r f o l g e n . ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 1 ...
- Page 2 S a f t e y t e m p e r a t u r e l i m i t e r If the safety temperature limiter has tripped, you can reset it with a "00 screwdriver" through the opening marked "Reset". This cannot be done un l the temperature has cooled down by approx. 10 K. ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 2 ...
- Page 3 Please note: This hea ng element is applicable in stainless steel boiler as well as in black steel / black steel enam- elled boilers. Select the se ngs via DIP switch according to the boiler type. For an installa on of the hea ng element into black steel or black steel enamelled boilers, the red slide switch (DIP switch) has to be le in posi on “2” (factory se ng). When installing the hea ng element into a stainless steel or chrome steel boiler, the slide switch (DIP switch) has to be switched to posi on “ON”. In case of disregard corrosion damages on device and boiler could be caused. ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 3 ...
- Page 4 - Incorrect opera on and maintenance - Not complying with direc ve VDI 2035 A p p l i c a b l e s t a n d a r d s Safety: EN60335-1 / -2-21 / -2-73 EMC: EN55014-1 / -2 CEM: EN62233 IP Code: EN60529 ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 4 ...
- Page 5 ASKOHEAT‐ Flange heater Ø 180 mm Fitting instructions ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 5 ...
- Page 6 ASKOHEAT‐ Flange heater Ø 180 mm Fitting instructions Posi on right: For stainless steel boiler Posi on le : For black steel- / enamelled boiler ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 6 ...
-
Page 7: Circuit Diagram
- L/N 230 V ~ (control voltage) - L1/L2/L3 400 V 3~ (power) » The power contactors must be fi ed by the customer! » The regula ons of the local electrical power u li‐ es must be complied with! ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 7 ... - Page 8 Needs cleaning Malfunction If the safety temperature Reset limiter trips, there is a fault or error. A qualified expert See user manual for the must inspect the system in qualified installer. this case. The version currently valid can be downloaded under "Downloads" from our homepage For technical data see the data sheet Subject to technical altera ons ASKOHEAT‐ _180_1-18_en MVGASV_160101_en_V3 www.askoma.com Page 8 ...