Operating; Fig. 4-18 Starting Machine With Tractor - Walinga AGRI-VAC 5614 Operator's Manual And Parts Book

4.10 OPERATING

When operating the Agri-Vac®, follow this
procedure:
1. Clear the area of bystanders,
especially small children, before
starting.
2. Be sure the machine is attached to the
tractor/power unit as per Sect.4.8.
3. Review and follow the Pre-Operation
Checklist (Section 4.5).
4. Be sure the machine is correctly
positioned and set-up per Section 4.9.
The trucks should have ample space
and clearance to drive under the
discharge cyclone.
5. Keep the PTO driveline as straight as
possible to have the universal joint
angles as small as possible.
6. Place chocks in front and behind the
tractor tires to it prevent moving.
7. START MACHINE
A. STARTING MACHINE WITH A TRACTOR:
a. Start the tractor, run at low idle.
b. Preliminary airlock setting:
i. Engage the tractor hydraulics to start
the airlock.
ii. Check the arrow on the indicator to be
sure airlock is turning in the correct
direction.
iii. Increase engine speed to1500 RPM
and use the flow divider to set the
airlock speed to approximately 60 RPM.
iv. Return the engine speed to low idle
and stop the airlock.

Fig. 4-18 Starting Machine With Tractor.

Agri-Vac Operator's Manual 34-18148-6 35