Download Print this page

Workrite Willow Dual-Wide Upgrade Instructions

Advertisement

Quick Links

Read and understand all these safety instructions before using the product.
Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk
Base firmly.
During installation, beware of the recoil of the Willow Arm body when attaching or detaching the monitor to the Willow
Arm. To prevent damage or injury when changing the monitor, always raise the Arm to its highest position before the
monitor is detached. The Willow Arm can support monitors from 1 to 14 pounds.
Do not attempt to disassemble, service or modify the product.
Use only a slightly damp cloth to clean the Willow Arm surface. Never use flammable solvents like alcohol, benzene,
thinner, etc. on the product.
A
Willow Arm Assembly
Qty: 1
M4 8mm Screw
M
Plastic Pivot
Washer
M8 Flat Head Cap Screw
M4 16mm Screw
Spacer
Qty: 1
Plastic Cap
7/32" Allen Wrench
O
Plastic Pivot Washer
Steel Washer
⅛" Allen
Plastic Cap
1/8" Allen Wrench
Wrench
Pivot Pin
Button Head Allen Cap Screw
M4 16mm Screw
M4 12mm Screw
Qty: 1
Pivot Pin
Plastic Pivot Washer
1/8" Allen Wrench
Verify that you have all the hardware and tools needed for the assembly
Check your packages against the parts list on page 1 to verify that you have all the parts needed.
You will also need the following tools:
#3 tip Phillips screwdriver
Willow
Dual-Wide Upgrade Instructions
TM
Important Safety Instructions
Parts grouped by carton
B
M8 Flat Head Cap Screw
F
Plastic Cap
M4 16mm Screw
M4 12mm Screw
N
7/32" Allen
Pivot Pin
Wrench
Qty: 1
M4 8mm Screw
Plastic Pivot Washer
1/8" Allen Wrench
7/32" Allen Wrench
Spacer
Button Head Allen Cap Screw
Steel Washer
C
Quick Release
Bracket
Qty: 1
M4 8mm Screw
M4 12mm Screw
M8 Flat Head Cap Screw
G
10mm Plastic
Spacers
Qty: 4
7/32" Allen Wrench
Plastic Cap
1/8" Allen Wrench
Spacer
P
Dual Splitter
Button Head Allen Cap Screw
Pivot Pin
Bracket
M4 16mm Screw
M4 12mm Screw
Qty: 1
Steel Washer
Plastic Pivot Washer
Steel Washer
1/8" Allen Wrench
S
⅜"x16 Lock
Nut
Qty: 2
D
M4x18
M4x12
Phillips
Phillips
Screws
Screws
Qty: 4
Qty: 4
M4 16mm Screw
Spacer
M4 8mm Screw
M4 12mm Screw
Pivot Cover Cap
M8 Flat Head Cap Screw
M4 8mm Screw
Qty: 1
M8 Flat Head Cap Screw
Plastic Pivot Washer
Steel Washer
7/32" Allen Wrench
Plastic Cap
7/32" Allen Wrench
Plastic Cap
Q
Flange
Button Head Allen Cap Screw
Pin
Spacer
Qty: 2
Pivot Pin
Button Head Allen Cap Screw
Pivot Pin
T
⅜" ID Belleville
Spring Washer
Qty: 2
E
M4x8
Phillips
Screws
Qty: 4
M4 16mm Screw
Spacer
M8 Flat Head Cap Screw
M4 8mm Screw
H
3/16" Allen Wrench
M4 16mm Screw
M4 12mm Screw
Qty: 1
M4 8mm Screw
M4 12mm Screw
Plastic Pivot Washer
Steel Washer
Plastic Cap
7/32" Allen Wrench
1/8" Allen Wrench
Plastic Pivot Washer
1/8" Allen Wrench
7/32" Allen Wrench
1/8" Allen Wrench
R
⅜"x16x2½" Button
Pivot Pin
Head Allen Cap
Button Head Allen Cap Screw
Screw
Qty: 2
Button Head Allen Cap Screw
U
⅜" x16x2½"
Flat Head Allen
Cap Screw
Qty: 1
#1500182 - Rev A
M4 12mm Screw
Spacer
M4 16mm S
1/8" Allen Wren
Steel Washer
Plastic Piv

Advertisement

loading
Need help?

Need help?

Do you have a question about the Willow Dual-Wide and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Workrite Willow Dual-Wide

  • Page 1 Willow Dual-Wide Upgrade Instructions Important Safety Instructions Read and understand all these safety instructions before using the product. Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk Base firmly.
  • Page 2 While holding the bolt with the 7/32" Allen wrench to keep to bolt from turning and loosening, tighten the nylock nut firmly to keep the bolt from loosening during use. Attach new Arm to Splitter Bar using the same method as above. Workrite Ergonomics 800.959.9675 www.workriteergo.com...
  • Page 3 VESA mount will not fit into the mounting location,10mm Plastic Spacers (F) have been supplied. Install these between the monitor and the VESA mount as shown with the shortest M4 screws possible. Note: Keep your Quick Release Bracket (B) for possible future use. Workrite Ergonomics 800.959.9675 www.workriteergo.com...
  • Page 4 Do not overtighten or the arm will be too stiff to make easy adjustments in monitor position. Adjust both screws in small, equal steps To increase friction turn screw clockwise To decrease friction turn screw counter-clockwise Friction Adjustment Workrite Ergonomics 800.959.9675 www.workriteergo.com...