Important Safety Instructions Read and understand all these safety instructions before using the product. Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk Base firmly. During installation, beware of the recoil of the Willow Arm body when attaching or detaching the monitor to the Willow Arm.
Page 2
Place the Steel Washer (X) followed by the Hex Nut (W) onto the Threaded Stud and tighten securely. Attach Willow Arm to Base Insert Pivot Pin (K) into Desk Base Assembly (I). Put Plastic Pivot Washer (M) over Pivot Pin.
Page 3
Quick Release Bracket as shown with the shortest M4 screws possible. Attach the Willow Arm to the monitor by sliding the Quick Release Bracket over the mounting plate. Note: Your Quick Release Bracket has convenient storage on its sides for the "...
Page 4
Adjust the Monitor Vertical Movement The Willow Arm is preset to balance a 6-pound monitor. If your monitor weighs more or less than this, it may be necessary to adjust the friction of the arm. Test the friction by raising the arm all the way up, waiting to see if it moves, and then lowering the arm all the way down.
Need help?
Do you have a question about the Willow and is the answer not in the manual?
Questions and answers