Using The Vacuum; Using The Parking Brake - Bissell ICONPET 2288 Series Manual

Using the Vacuum

Looking for more guidance? Go to support.BISSELL.com for tips and 24-7 support while
cleaning.
ICONPET® Cordless can be used as a stick vacuum, hand vacuum or for extended reach with hand
vacuum + wand.
1.
Press the Power Button to
begin cleaning and to turn OFF
the machine when finished
cleaning.

Using the Parking Brake

Go to support.BISSELL.com for additional how-to videos.
1.
The built-in brake helps
prevent the machine from
slipping on the floor when it is
leaning against a wall.
WARNING
2.
Press the Cleaning Mode Button to toggle between the
three settings:
•••
Recommended for maximum suction. It's the most powerful
setting which is great for cleaning carpets, however has the
shortest run time. This is the default suction mode when the
vacuum is turned ON.
••
Recommended for everyday cleaning. It's great for hard
floors, low pile carpets and area rugs. It balances power and run
time.
•
Recommended for the longest run time. It's great for hard
floors and offers the quietest sound.
2.
To engage the brake,
simply push the brake on the
motorized foot forward.
Do not use your vacuum until you are familiar with all instructions and operating procedures.
3.
To disengage the brake, pull
it forward.
BISSELL.com 7