Before using for the first time
5. Commissioning TwinDos
Set up "TwinDos"?
Skip
Touch the
Continue
TwinDos straight away.
Useful tip: To postpone setup until
later: touch the
Skip
following message will appear in the
display:
It is possible to set up later in "Settings" /
"TwinDos".
Confirm with the
Settings for compartment
The procedure below describes the
procedure for Miele UltraPhase 1 and
Miele UltraPhase 2. The procedure for
other detergents is similar.
Agent for comp.
No agent
Miele
UltraPhase 1
Touch the
Miele UltraPhase 1
22
sensor to set up
sensor. The
sensor.
OK
Universal
Delicates
detergent
detergent
Colour
Delicates/
detergent
Woollens
sensor.
The following message will appear in
the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 for (hardness range
I) is preset.
Continue
Dosage for comp.
Confirm the preset value with the
OK sensor, or change the value.
Hardness level I
Hardness level II
Hardness level III
11:02
The following appears in the display:
Insert container
OK
48
47
46
ml
45
44
UltraPhase 1
46 ml
58 ml
70 ml
11:02
OK