HOPEFULL Hc738a Instruction Manual page 4

 Don't put the bed in the wet place, or else the electrical components may be
damaged and cause the accident.
 When the bed without use or move the bed, please take off the plug and wreathe it
on the electric wire rack in order to avoid damaging the plug or electric wire.
 The products may be disturbed by other wireless electronic equipment, in this
case , users may use the method to avoid the interruption.
2). In order to avoid the patient falling from the bed, please use both bedside rails.
 Don't put your head, hands and legs out of the bed, or else you may fall out from
the bed and get hurt.
 Do make sure to use the bedside rails when carry the patient.
 Please do not put your head and neck into the clearance between the bedside rails
or the head panels, or else you may fall from the clearance and get hurt. Especially
take care for the patient who can't control himself body.
 Don't sit on the bedside rails or head and foot panels or stand on the bed, all that
may make you fallen out from the bed and get hurt.
 It's not allow to operate by the children, or else it may make the children fallen from
the clearance of the bedside rails and hurt themselves.
3). When adjust the angles of the bed board, please pay attention to patient status.
 When adjust the bed, please make sure there is no barrier around and your eyes
do not leave away from the patient.
 When patient is in prostrate status, do not lift up the back bed board, or else the
patient may get hurt.
 The angle between the back bed board and the knee bed board should be not less
than 90°, or else it will oppress the patient abdomen and get hurt (except for the
medical people have special arrangement)
 If the patient does movement during the bed board adjustments, he/she may fall
from the bed and get hurt.
 Please do not put your hands and feet into the clearance between the mattress
platform, head&foot panels, the bedside rails , also not get into the underside of
the bed , or else you may be clamped by the bed movement parts or the bed frame,
bedside rails and get hurt .
 Please do not sit on the process lifting up bed board or the already risen bed board,
or else the bed board supported part may get distortion or breakage because of the
heavy pressure.
4). Before adjust the bed, please pay attention to the wall and other barriers, and make
sure the clearance between the bed and the wall or other barriers is more than
20cm.Because when adjust the bed height, the bed will do the up and down or front and
back movement, it must confirm the bed will not touch the wall or the barriers when adjust.
Or else, the bed will get distortion or breakage, and also break the surrounding object.
5). Except for moving the beds, please make sure to lock the castors and fix the bed well.
When the patient gets up and down the bed, it may cause the unexpected hurt because of
the bed movement.
HOPEFULL ® electric bed Instruction for use
4