Table of Contents
Advertisement
2.10 Control box connection methods
Wire connection methods:
1. Power supply (Electric source)
2. Hi-low actuator
3. Leg actuator
4. Back actuator
5. Handset socket
Notices: If the problems are judged initially from control box，don't open and repair
it by yourself. Please contact the manufacturer or its authorized agents for service.
2.11
Bed maintenance and disposal
1. In order to use the bed well, you must do some maintenance on beds regular. We
suggest to make the complete inspection per 6 months, to sure all the jointed parts are no
loose, the bed up/down operation normal, battery can work well when no electricity.
2. When do the inspection, you should add some lubricating oil on the bed moving parts, if
find the parts are abraded seriously, please change a new one.
3. Avoid to hit the bed or use the sharp tools scratch the surface.
4. Please avoid the water go into the bed, it will cause the rusty or the bacteria. Wipe the
water right away if you find the water on the bed.
5. When the electric parts have problems, please don't repair by yourself, do remember to
contact the supplier or the agent to do the maintenance
6. When the bed reach to the life-span, the plastic and metal parts can be recycle. The
electric parts should be sent to the qualification companies to dispose in accordance with
your regional waste disposal regulations.
HOPEFULL
®
electric bed Instruction for use
15
1
2
3
4
5
Advertisement
Table of Contents
