Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pixapro ST-III Plus-F
Summary of Contents for Pixapro ST-III Plus-F
- Page 1 2.4GHz Wireless Flash Trigger ® PIXAPRO LTD. 50 Popes Lane, Oldbury, West Midlands, B69 4PA Tel: 0121 552 3113 Web: www.essentialphoto.co.uk E-mail: info@essentialphoto.co.uk Company Registration No. 07601334 705-X2TF00-00 Made In China...
-
Page 2: Table Of Contents
Thanks for your purchase of this ST-III Plus-F wireless flash trigger. Foreword Sync Socket Settings This wireless flash trigger is suitable for using FUJIFILM cameras to control Pixapro Warning SHOOT Function Settings flashes with ONE System e.g. camera flash, outdoor flash, and studio flash. Featuring Names of Parts C.Fn: Setting Custom Functions... -
Page 3: Warning
Warning Names of Parts Body Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Hot Shoe Speedlight Connection Always keep this product dry. Do not use in rain or in damp conditions. AF Assist Beam Switch Keep out of reach of children. -
Page 4: Lcd Panel
Battery Names of Parts AA alkaline batteries are recommended. LCD Panel Installing Batteries As shown in the illustration, slide the battery compartment lid of the flash trigger and insert two V0.2 /128 CH 01 SHUTTER AA batteries separately. BLUE.T. CURTAIN Battery Indication BEEP LEAF... -
Page 5: Setting The Flash Trigger
Setting the Flash Trigger Setting the Flash Trigger Power Switch Wireless ID Settings Slide the Power Switch to ON, and the device is on and status indicator lamp will not Change the wireless channels and wireless ID to avoid interference for it can only be reveal. -
Page 6: Output Value Settings
Turn the select dial to For most of camera flashes, the minimum output value is 1/128 and cannot be set to 1/256. However, the value can change to 1/256 when using in combination with Pixapro strong power flashes e.g. AD600, change the setting value. -
Page 7: Modeling Lamp Settings
PC SYNC 1.1 When choosing IN, this sync socket will enable ST-III Plus-F to trigger flash. Shutter Sync Settings 1.2 When choosing OUT, this sync socket will High-speed sync: setting the SYNC in flash send trigger signals to trigger other remote... -
Page 8: Shoot Function Settings
Choose any figure from 01-99 (the old version triggering signals to the slave unit, which is suitable flashes cannot use this function temporarily) for multi person photography. However, this Trigger ST-III Plus-F to fire flash Sync cord jack PC SYNC function consumes power quickly. -
Page 9: Using The Flash Trigger
Setting the Flash Trigger Using the Flash Trigger 1.2 Short press the <MENU> button to set channel, Custom Function Function Setting Signs Settings and Description Zoom STEP Power output 1/128(0.3) The minimum output is 1/128(change in 0.3 step) group, mode and parameters (refers to the value 1/256(0.3) The minimum output is 1/256(change in 0.3 step) -
Page 10: As A Wireless Studio Flash Trigger
Using the Flash Trigger Using the Flash Trigger <GR/CH> button to set the same channel to the flash trigger, and short press 3. As a Wireless Studio Flash Trigger Take LUMI 400II as an example: the < GR/CH> button to set the same group to the flash trigger (Note: please refer to the relevant instruction manual when setting the oudoor flashes of other 3.1 Turn off the camera and mount the transmitter models). -
Page 11: As A Flash Trigger With 3.5Mm Sync Cord Jack
Using the Flash Trigger Using the Flash Trigger 4. As a Flash Trigger with 3.5mm Sync Cord Jack 5. Connect to Smartphone through Bluetooth Operation method: Using method: V0.2 SHUTTER 4.1 The connection method please refers to the 5.1 Short press the <MENU> Button to enter BLUE.T. -
Page 12: Compatible Smartphone Models
Compatible Smartphone Models Using the Flash Trigger This flash trigger can be used on the following Smartphone models: 5.5 Full match and back to APP main interface. iPhone 6S iPhone 6S Plus iPhone 7 Plus iPhone 7 iPhone 8 Plus 5.6 When started the Bluetooth function, the Bluetooth icon will be displayed on the iPhone 8... -
Page 13: Compatible Flash Models
2.4GHz X100T do not have second-curtain sync (REAR) function. Note: The range of support functions: the functions that are both owned by ST-III Plus-F and flash. The AF-assist beam will light up when the shutter is at low speed(<200). This table only lists the tested camera models, not all FUJIFILM series cameras. -
Page 14: Technical Data
Firmware upgrade Upgrade through the Type-C USB port USB socket, please use Type-C USB connection line. As the firmware upgrade needs the support of Pixapro G3 software, please Memory function Settings will be stored 2 seconds after last operation and recover after a restart download and install the "Pixapro G3 firmware upgrade software"... -
Page 15: Attentions
Operating distance limited or flash missing. Check if batteries are exhausted. If so, change them. The Reason & Solution of Not Triggering in Pixapro 2.4G Wireless Disturbed by the 2.4G signal in outer environment (e.g. wireless base Caring for Flash Trigger station, 2.4G wifi router, Bluetooth, etc.) - Page 16 FCC Statement A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ST-III Plus-F and is the answer not in the manual?
Questions and answers