Subscribe to Our Youtube Channel
Related Manuals for Pixapro ST-IV F
Summary of Contents for Pixapro ST-IV F
- Page 1 ® PIXAPRO LTD. 50 Popes Lane, Oldbury, West Midlands, B69 4PA Instruction Manual Tel: 0121 552 3113 Web: www.essentialphoto.co.uk E-mail: customerservice@essentialphoto.co.uk 705-XPRZF0-00 Made In China...
-
Page 2: Table Of Contents
PC sync sockets. Installing Batteries ZOOM Value Settings With ST-IV F wireless flash trigger, high speed synchronization is available for most of Battery Level Indication Shutter Sync Settings camera flashes in the market which support TTL. The max flash synchronization speed... -
Page 3: Warning
Warning Names of Parts Body Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Group Button 1 Always keep this product dry. Do not use in rain or in damp conditions. LCD Panel Group Button 2 Keep out of reach of children. -
Page 4: Lcd Panel
Battery Names of Parts AA alkaline batteries are recommended. LCD Panel Installing Batteries As shown in the illustration, slide the battery compartment lid of the flash trigger and insert two AA batteries separately. /16 + 0.3 Battery Indication Check the battery level indication on the LCD panel to see the remaining battery level during the usage. -
Page 5: As A Wireless Outdoor Flash Trigger
Using the Flash Trigger Using the Flash Trigger 1.2 Long press the <Zm/CH> button to set (Note: please refer to the relevant instruction manual when setting the outdoor flashes of other channel, group, mode and parameters (refers Zoom models) to the contents of “Setting the Flash Trigger”). 2.4 Press the camera shutter to trigger and the status lamp of the flash trigger 1.3 Turn on the camera flash, press the SLAVE... -
Page 6: As A Flash Trigger With 2.5Mm Sync Cord Jack
Setting the Flash Trigger Using the Flash Trigger Power Switch As a Flash Trigger with 2.5mm Sync Cord Jack Operation method: Slide the Power Switch to ON, and the device is on and status indicator lamp will not 4.1 The connection method please refers to the reveal. -
Page 7: Wireless Id Settings
1/128 and cannot be set to 1/256. However, the value can change to 1/256 when using in combination When setting the group to 16 groups (0-F), there is only with Pixapro strong power flashes e.g. CITI600, etc. manual mode M. -
Page 8: Flash Exposure Compensation
Setting the Flash Trigger Setting the Flash Trigger Flash Exposure Compensation Settings Until all the amounts are set. Or during any value setting, short press the <MODE> button to exit the setting status. No values will blink. Multi-group displays in the TTL mode In the multi flash setting submenu, short press the <MODE>... -
Page 9: Zoom Value Settings
Zoom 24 1.1 When choosing IN, this sync socket will enable AUTO/24 to 200. Choose the desired value and short press Zoom 24 ST-IV F to trigger flash. SHOOT the <Zm/CH> button again to back to the main menu. Zoom 24 Note: The flash’s ZOOM should be set to Auto (A) mode before... -
Page 10: Shoot Function Settings
Always off and the master unit will send parameters and Always lighting triggering signals to the slave unit, which is suitable Enable ST-IV F to trigger flash SYNC Sync cord jack for multi person photography. However, this function consumes power quickly. -
Page 11: Compatible Flash Models
M mode which are transformed HyBRID360 TTL 360j Note: The range of support functions: the functions that are both owned by ST-IV F and flash. from TTL mode, being subjected The relationship of Pro AC wireless system and ST-IV wireless system:... -
Page 12: Compatible Camera Models
Compatible Camera Models Technical Data FUJIFILM cameras are divided into three kinds according to their controlling ways to ST-IV F Model camera flash: Compatible cameras FUJIFILM cameras (autoflash) GFX50S, X-Pro2, X-T20 , X-T2 , X-T1 Support for the cameras that have PC sync socket. -
Page 13: Restore Factory Settings
USB connection line is not included in this product. As the USB port is a Type-C USB socket, please use Type-C USB connection line. As the firmware upgrade needs the support of Pixapro G2 software, please download → Please turn on the “close distance wireless mode” on the flash trigger (＜0.5m): and install the "Pixapro G2 firmware upgrade software"... -
Page 14: Caring For Flash Trigger
4. Whether the flash trigger and the receiver end equipment are in the low Statement battery states or not → Please replace the battery(the flash trigger is recommended to use 1.5V A. This device complies with part 15 of the FCC Rules. Operation is subject to the disposable alkaline battery).
Need help?
Do you have a question about the ST-IV F and is the answer not in the manual?
Questions and answers