Kenwood DDX919WS Instruction Manual page 61

4
Set each item as follows.
Camera Assignment Settings
■
Set up the camera assignment. See To set up
the camera assignment settings (P.61).
[Rear Camera Interruption]
■
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
[Rear Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 1 ("Rear
Camera") set. For details, see the instruction
manual of your camera.
[Parking Guidelines]
■
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
[Guidelines SETUP]
■
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.62).
[Front Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
[Front Camera Interruption *]
■
[10 sec]/[15 sec] (Default)/[20 sec]: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[OFF]: Cancel.
*1 When CMOS-3xx series is connected with
this unit.
*2 To use the function, it is necessary to connect
CMOS-3xx series and to set [Camera
Assignment Settings] to [Front]. (P.61)
*3 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON] and to set
[Camera Assignment Settings] to [Front].
(P.61)
Ñ
1
2
1
For Front view camera/Dashboard
camera input terminal:
1
2
2
3
3
Other External Components
To set up the camera
assignment settings
Touch [Camera Assignment Settings] on
the Camera screen. (P.60)
Set each item as follows.
[FRONT VIEW CAMERA / DASH CAM]
■
Set the camera assignment from view
camera connected to Front view camera/
Dashboard camera input terminal.
■
[AV-IN]
Set the camera assignment from view
camera connected to AV-IN input terminal.
Touch [FRONT VIEW CAMERA / DASH
CAM].
h Displays the picture from view camera
h
connected to Front view camera/
Dashboard camera input terminal.
Select the view camera to set up.
1
1
[Picture from view camera]
Displays the picture from view camera
connected to Front view camera/Dashboard
camera input terminal. (P.96)
2
[Front]
3
[Dashboard Camera]
4
[Right]
5
[Left]
6
[None]
Touch [Enter].
2 3 4
5 6
English
61