Traffic Information; Radio Setup - Kenwood DDX919WS Instruction Manual

Traffic Information (FM only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts. However, this feature requires
a Radio Data System that includes the TI
information.
1
Touch [TI].
h Traffic information mode is set.
h
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
• To cancel Traffic Information: Touch [Cancel].

Radio Setup

You can set tuner related parameters.
1
Touch [
].
h Radio SETUP screen appears. h
2
Set each item as follows.
[NEWS] (FM only)
■
Sets a news bulletin interrupt time. Default
is "OFF".
[AF] (FM only)
■
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is "OFF".
[Regional] (FM only)
■
Sets whether to switch to the station only
in the specific region using the "AF" control.
Default is "OFF".
[LO.S] (FM only)
■
Turns the Local Seek function on or off.
[Auto TP Seek] (FM only)
■
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is "ON".
[Language Select] (FM only)
■
Selects a display language for the PTY
function.
[Aerial Control]
■
Allows you to turn off the Radio Data System
function to prevent the motor-driven
antenna from extending. Default is "ON".
Radio
43
English