Kenwood DDX919WS Instruction Manual page 29

Wireless connection
(Except DMX8019S)
You can select the iPhone registered as the
Bluetooth device from [Apple CarPlay Device
List] and use it as the Apple CarPlay device.
Preparation
• To register an iPhone by the connection via the
USB (Black) terminal
– Connect an iPhone via the USB (Black) terminal
and operate the iPhone according to the
confirmation messages displayed on the
iPhone. The iPhone is registered in [Apple
CarPlay Device List]. Removing the iPhone
from the USB (Black) terminal and selecting
the registered iPhone from [Apple CarPlay
Device List], the iPhone will be connected
wirelessly.
• To register an iPhone by the connection via
Bluetooth
] on the [Apple CarPlay
– Touching [
Device List] screen (P.29), displays
Bluetooth pairing waiting dialog. Referring
to Register the Bluetooth device (P.49)
and registering the iPhone, the iPhone will be
connected wirelessly.
1
Press the [HOME] button.
2
Touch [
].
3
Touch [Apple CarPlay]. (P.15)
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of an iPhone.
• If two or more iPhones have been registered,
select the iPhone to be used as the [Apple
CarPlay] source. (P.29)
• You can also select the iPhone registered in
[Apple CarPlay Device List] (P.29) even
when the [Apple CarPlay] icon is not activated
on the source selection screen.
• It is necessary to connect the GPS antenna and
the speed pulse input in order to use a wireless
Apple CarPlay.
To switch the Current Screen to the
Apple CarPlay Screen When Connecting
Your iPhone
• Touch [Apple CarPlay] icon on the source
selection screen. (P.15)
• Touch the following connection message if the
message appears.
NOTE
• The connection message appears when;
– The iPhone you used previously is connected
again.
– The screen other than HOME and the source
selection screen is displayed.
• The connection message is displayed for about
5 seconds.
Ñ
Select an Apple CarPlay device
(Except DMX8019S)
If two or more iPhones compatible with Apple
CarPlay have been registered, select the
iPhone to be used as the Apple CarPlay source.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [AV].
4
Touch [Apple CarPlay Device List].
5
Select a device.
The Apple CarPlay device connected via
the USB and the registered Apple CarPlay
devices ready for wireless connection are
displayed.
• [ ] : Displays a Bluetooth pairing waiting
dialog. For details, see Register the Bluetooth
device (P.49).
• [ ] : Displays confirmation message to
disconnect the device.
• [ ] : Displays Device Remove screen.
(P.30)
APPS
29
English