Start Up - Danfoss T70 1 HALL User Manual

User Manual
T70 1 HALL Transmitter
Technical description

start up

© Danfoss | January 2019
Use the information below to properly turn the transmitter ON (OPERATION mode).
1. Place a charged battery in the transmitter. The charge must be done following the instructions of the
Battery Chargers' Manual.
2. Turn the contact key.
3. Push and pull out the STOP button.
LED will flash orange-green pulse. If the transmitter has LCD, it displays the identification of the
machine and battery level (only if it has been pre-programmed).
LED pulse
BC292358757567en-000101 | 7