Table of Contents
Advertisement
NAT/Route mode installation
Advanced NAT/Route mode settings
DMZ interface
FortiGate-60R Installation and Configuration Guide
Use
Table 13
to gather the information that you need to customize advanced
FortiGate NAT/Route mode settings.
Table 13: Advanced FortiGate NAT/Route mode settings
DHCP:
WAN1 interface
PPPoE:
If your ISP supplies you with an IP address using PPPoE, record your
PPPoE user name and password.
DHCP:
WAN2 interface
PPPoE:
If your ISP supplies you with an IP address using PPPoE, record your
PPPoE user name and password.
DHCP server
The FortiGate unit contains a DHCP server that you can configure to
automatically set the addresses of the computers on your internal network.
Use
Table 14
to record the IP address and netmask of the FortiGate DMZ interface if
you are configuring it during installation.
.
Table 14: DMZ interface (Optional)
DMZ IP:
_____._____._____._____
Preparing to configure NAT/Route mode
If your Internet Service Provider (ISP) supplies you with
an IP address using DHCP, no further information is
required.
User name:
Password:
If your Internet Service Provider (ISP) supplies you with
an IP address using DHCP, no further information is
required.
User name:
Password:
Starting IP:
_____._____._____._____
Ending IP:
_____._____._____._____
Netmask:
_____._____._____._____
Default Route:
_____._____._____._____
DNS IP:
_____._____._____._____
Netmask:
_____._____._____._____
45
Advertisement
Table of Contents
Need help?
Do you have a question about the FortiGate FortiGate-60R and is the answer not in the manual?
Questions and answers