Fortinet FortiGate FortiGate-60 Administration Manual page 361

Log & Report
FortiGate-60 Administration Guide
Raw or
Formatted
To view log messages in the FortiGate memory buffer
1 Go to Log&Report > Log Access.
2 Select the log type you wish to view.
3 Select Memory from the Type list.
The log messages are displayed.
You can change the displayed columns or see the raw log messages, go to the
previous or next log page, or search the log by selecting the corresponding icon.
Choosing columns
You can customize your log messages display using the Column Settings window.
The column settings apply only when the formatted (not raw) display is selected.
Figure 188:Column settings for viewing log messages
Available fields The fields that you can add to the log message display.
-> Right arrow button. Select to move selected fields from Available fields list to
Show these fields list.
<- Left arrow button. Select to move selected fields from the Show these fields
list to the Available fields list.
Show these The fields that are displayed as columns in the log messages list. The fields
are listed in order with the first column at the top of the list.
fields in this
order
Move up Move selected field up one position in the Show these fields list.
Move down Move selected field down one position in the Show these fields list.
The Detailed Information column provides the entire raw log entry and is not needed
unless the log contains information not available in any of the other, more specific
columns.
Column settings button. Select to choose columns for log display.
Select Raw to switch to an unformatted log message display. Select
Formatted to switch to a log message display organized into columns.
01-28006-0002-20041105
Log access
361